Energy 5.1 Take Classic Home Theater Speaker Placement for Maximum Performance

| January 30, 2011 | 0 Comments

Energy 5.1 Take Classic Home Theater Speaker Placement

The Energy 5.1 Take Classic Home Theater proves that comfort does not must imply compromise. Sure, you’ll be able to shop for other home theater systems, but you won’t get far better performance, or much better looks.

The Energy 5.1 Take Classic Home Theater system presents terrific efficiency and wonderful functions:

  • Our patented Convergent Source Module (CSM) 3-inch poly-titanium woofer and .75-inch hyperbolic aluminum-dome tweeter -the core of Energy speakers
  • Ribbed Elliptical Surround woofers create high efficiency, low distortion
  • An aluminum dome tweeter for sonic accuracy
  • Front and rear venting for a lot more effective bass response

Energy 5.1 Take Classic Home Theater Speaker Placement: Maximum Performance Suggestions

Energy 5.1 Take Classic Home TheaterThe middle channel speaker should be centrally situated to ensure that the dialogue seems to be coming from the center of the screen. It should to be above or below the screen, as closely to it as possible. If you’re making use of a rear projection tv, the most likely solution is usually to put it above the screen. For those who have a front projection tv, you have choices-stand mounting, or placement on furniture, as an example. It really is critical, though, to position the speaker to ensure that its front edge is even with the edge of the shelf or stand supporting it. Undesirable diffraction occurs when the center channel is too far back into a cabinet or other surfaces with edges that could obstruct sound dispersion.

For left or right front channels, the space in between the Energy 5.1 Take Classic Home Theater speakers should be 6-8 feet at minimum for the best stereo imaging. The ideal room shape is rectangular, with the speakers along one of the shorter walls, facing the opposite side. If feasible, do not place Energy 5.1 Take Classic Home Theater speakers against a wall or at rear of a bookshelf; corner placement is typically the worst choice. Make an effort to keep the speakers-especially rear vented models-at least a couple of feet from the surface behind it, except if you use a vent plug. For the best outcomes when mounting on a rear wall, place the Energy 5.1 Take Classic Home Theater speakers so they flank the principal listening location and point toward the front of the room. They should be raised to a height of roughly six feet and should ideally have a space of six feet in between them.

The three most common subwoofer locations incorporate corners (which can result in boomy or exaggerated low frequency response), placement along a wall, away from the corner (producing moderate bass efficiency with elevated fidelity more than corner placement), or beside a front speaker (developing a far better blend with the front speaker, but sacrificing overall volume). Playing with subwoofer placement is highly advised; slight shifts in placement can create massive differences in sound reproduction. To test subwoofer placement, install it temporarily in your major listening position and walk around the  room while playing a familiar piece of music until you discover the best sounding position for your Energy 5.1 Take Classic Home Theater.

Energy 5.1 Take Classic Home Theater Speaker Placement for Maximum Performance

If you enjoyed this classified ad, please consider leaving a comment or subscribing to the RSS feed to have future articles delivered to your feed reader.

Tags: , , ,

Category: Products and Services

Leave a Reply